Diagnostic buffer of module CP 443-1
Order No./ Description Component Version
6GK7 443-1EX11-0XE0 Hardware 5
- - - Firmware V 2.7.3
Rack: 0
Slot: 4
Event 1 of 234: Event ID 16# F9C1:4214
Protocol error.
CID of the connection: 89, disconnect reason: 85, connection status: 4
External error, Incoming event
11:19:40.660 PM 04/27/2013
Event 2 of 234: Event ID 16# F9C1:4226
Error CC-TPDU was received but is not expected in this status.
CID of the connection: 89, connection status 2, current status: 4.
External error, Incoming event
11:19:40.658 PM 04/27/2013
Event 18 of 234: Event ID 16# F9C1:2101
All receive buffers on the LAN are in use.
External error, Incoming event
07:12:39.943 AM 04/27/2013
以上错误是什么意思，如何解决？
最佳答案
CP 443-1模块的诊断缓冲区
订单号和描述组件的版本6gk7 443-1ex11-0xe0
硬件5———V 2.7.3固件机架：0槽：
4234 1事件：事件ID 16 # f9c1:4214
协议错误。CID的连接：89，
断开的原因：85，
连接状态：4外部错误，输入事件
11:19: 40.660点04 / 27 / 2013
234 2事件：事件ID 16 # f9c1:4226错误
cc-tpdu接收但不期望在这个状态。CID的连接：89，
连接状态2，现状：4。外部错误，输入事件11:19: 40.658点04 / 27 / 2013
18事件234：事件ID 16 # f9c1:2101所有的接收缓冲区在局域网中使用。
外部错误，输入事件
参考链接：《cp342-5作为dp从站中的问题》
http://www.jcpeixun.com/knowledge/baike/002592.html
提问者对于答案的评价：
.
原创文章，作者：more0621，如若转载，请注明出处：https://www.zhaoplc.com/plc240556.html
微信扫一扫 
支付宝扫一扫 